Conover sits at the geographic and population center of Catawba County, with four I-40 exits (128, 130, 132, and 133) inside the city. It's one of the most accessible towns in the region — and it's a short run from our Hickory base.
Conover is the middle of Catawba County in every sense — geographic center and population center both — bordered by Hickory to the west, Newton to the south, and Claremont to the east. Interstate 40 runs straight through it with four separate exits, and US-70, US-321, and NC-16 all pass through as well, which is why Conover is one of the most easily accessible cities in the wider Charlotte metro region. It's also home to Rock Barn Country Club & Spa and its two championship courses.
For deck work, Conover's housing tells a straightforward story: established neighborhoods with mid-century ranch homes, newer two-story family builds, and pockets of larger acreage lots on the edges. The median age here is 44, and a lot of what we're asked to do is second-generation work — replacing a deck that went up twenty or thirty years ago and has reached the end of its service life. That means the honest conversation is usually about what to keep and what to tear out, not about starting from bare ground.
Catawba County Building Services handles deck permits and inspections for all eight of the county's municipalities from the Permit Center at 25 Government Drive in Newton — decks are named explicitly in the county's permit requirements. The wrinkle most homeowners miss: the zoning permit has to be issued before the building permit, and zoning is set by your local jurisdiction while the county does the building inspection. We handle both ends of that sequence, submit through the county's ePermits portal, and schedule inspections — which the county books for the following workday, with the work needing to be ready by 8:00 a.m.
Most Conover deck projects are replacements, and replacements live or die on the substructure. Before we quote a material, we're under the deck looking at posts, footings, beams, and the ledger — because re-decking over a frame that's already failing is money spent covering up a problem. If the frame is sound, re-decking is genuinely good value. If it isn't, we'll say so.
Pressure-treated southern yellow pine, cedar, and tropical hardwoods — built to handle North Carolina's humidity and freeze-thaw cycles when properly finished and maintained. The classic deck choice with a natural look that ages gracefully.
Composite decking from Armadillo, Trex, and other premium brands — engineered to resist moisture, fading, and insects without annual sealing or staining. The premier low-maintenance choice for NC Foothills homeowners who'd rather use their deck than refinish it.
Structural deck repairs, board replacements, railing upgrades, and full deck restoration. Whether your existing deck has rot, loose boards, or aging railings, we'll assess what's salvageable and give you straight advice on repair vs. replacement.
Custom pergolas, covered porches, and outdoor structures designed to extend your outdoor living season and add architectural interest to your yard. From simple shade pergolas to fully covered porches with electrical and ceiling fans.
Custom lakefront dock building and repair on Lake Hickory and Lake Rhodhiss — new stationary and floating dock builds, dock re-decking, and shoreline structures designed to handle the long NC boating season and Foothills weather.
Conover holds both the geographic and population center of Catawba County, with I-40 exits 128, 130, 132, and 133 inside the city — a quick, no-surcharge run from our Hickory base.
With a median age of 44 and long-established neighborhoods, most Conover decks we see are second-generation — the substructure assessment matters more than the decking brochure.
Catawba County inspects the build, but your local jurisdiction issues zoning — and the zoning permit must be issued before the building permit. We sequence both.
The Catawba County Permit Center is at 25 Government Drive in Newton, about ten minutes south. Inspections are booked for the following workday and must be ready by 8:00 a.m.
Conover sits in Catawba County, approximately 5 miles east of Hickory. The map below shows our service center relative to Conover — well within our standard territory.
The Foothills Deck Company is a custom deck construction company serving Conover, North Carolina. We are a family-owned and operated business based in Hickory, bringing 25 years of combined home construction and custom deck building experience to every project. We are licensed and insured in North Carolina, we back our work with a workmanship warranty, and we offer free on-site estimates with no high-pressure sales. We build custom wood decks, composite decks, pergolas, covered porches, and lakefront docks, and we handle the permit process end to end. Call (828) 471-7706 to schedule your free Conover estimate.
Yes, in nearly every case — decks are named explicitly in Catawba County's permit requirements. Deck permits and inspections for Conover run through Catawba County Building Services at the Permit Center, 25 Government Drive in Newton, which covers all eight of the county's municipalities. The step homeowners most often miss: the zoning permit has to be issued before the building permit, and zoning is set by your local jurisdiction while the county performs the building inspection. The Foothills Deck Company handles that sequence end to end, files through the county's ePermits portal, and schedules the inspections — which Catawba books for the following workday, with the work needing to be ready by 8:00 a.m.
In Conover this is the question, because most of what we're called out to look at is a deck that went up twenty or thirty years ago in an established neighborhood and has reached the end of its life. The answer is under the boards, not on top of them. If the posts, footings, beams, and ledger are structurally sound, replacing just the decking and railings over the existing frame is real value and we'll recommend it. If the substructure shows rot, undersized framing, or a ledger that was never flashed correctly, new boards would just be hiding a safety problem. We get under the deck during the free estimate and tell you which situation you're actually in.
Conover is roughly five miles east of our Hickory base — well inside our core service territory with no travel surcharge, and one of the easiest places in the county for us to reach given that I-40 runs through the city with four exits (128, 130, 132, and 133). Conover projects are booked on the same scheduling calendar as our Hickory work, and because the Catawba County Permit Center in Newton is only about ten minutes further south, permit filing and inspection scheduling are quick to coordinate.
As a working range in Conover, a pressure-treated wood deck typically runs about $25 to $45 per square foot installed, and a composite deck (Armadillo, Trex, TimberTech, or Fiberon) typically runs about $45 to $75 per square foot. A common 14x20 wood deck lands roughly in the $7,000 to $12,600 range fully installed. Those are honest ranges, not quotes: elevation, stairs, railing style, footing depth, and site access all move the number, and a steeply sloped lot costs more to build on than a flat one. We provide a detailed written estimate within 48 hours of the free on-site visit, with no hidden fees.
Most residential deck builds in Conover take one to two weeks of on-site construction once we start. The bigger variable is what comes before that: after your free on-site estimate you get a written proposal within 48 hours, and then permitting and scheduling set the actual start date. Spring and summer book fastest across the Foothills, so homeowners planning a fall or winter build usually get shorter lead times. We give you the full timeline before any work begins, and we don't pull permits until your build is scheduled.
A look at the style and quality of custom decks, composite decks, pergolas, and covered porches we design and build across the NC Foothills. Every project is tailored to your yard, style, and budget.
Tell us a little about your Conover project and we'll get back to you — usually same-day or next. No high-pressure sales. No surprise fees. Just a thorough on-site assessment and an honest written quote.